What does E:0030 mean on an Ingersoll Rand Xe-series controller?
Short answer: Remote start failure. If your Ingersoll Rand Xe-series controller (Xe-50M/Xe-70M, R-series rotary) is showing E:0030, the controller has logged a specific, documented condition. This page covers what it means, what causes it, what you can safely fix yourself, and when — and why — it takes a technician.
What exactly is the machine telling you?
Shutdown trip on digital input C3 related to the remote start circuit — the controller detected a fault in the remote start signal. (Some third-party sites misreport E:0030 as a temperature trip; the Ingersoll Rand Xe-50M/70M manual lists it as Remote Start Failure.)
Which machines show this?
modern Ingersoll Rand R-series rotary screw compressors controlled by the Xe-50M and Xe-70M — the current web-enabled controller family with a full-text display. Faults come in two clearly labeled classes: A: codes are alarms, where the machine keeps running but wants attention (A:2118 high pressure, A:2128 high temperature, A:4804 service due), and E: codes are trips that shut the compressor down (E:0010 emergency stop, E:0020 motor overload, E:0129 excess temperature). Practical tip: the letter tells you your time budget — an A: code is a scheduled-maintenance conversation, an E: code that repeats after one reset is a service call, and third-party code lists sometimes mislabel these, so trust the manual's definition.
What causes it?
- Fault in the remote start signal on digital input C3
- Remote start switch stuck closed
- Wiring or input configuration changed (note: some third-party sites misreport this code as a temperature trip)
Can you fix it yourself?
Partly — if remote start isn't used, staff can check the switch isn't stuck and test a local start after a reset.
Step by step — what to try, in order:
- If remote start isn't intentionally used, verify the remote start option/wiring configuration hasn't changed
- Check the remote start switch isn't stuck closed
- Reset and test a local start from the controller
When do you need a technician — and why?
Recurring trips need a technician to verify the remote start wiring and the controller's digital input configuration against the actual installation.
If it does come to a service call and you're in Nashville, TN or Birmingham, AL, we maintain independently compiled lists of local companies that service industrial air compressors — real businesses with verified contact information, none of whom paid to be listed.
Related questions
What does E:0030 mean on an Ingersoll Rand Xe-series controller (Xe-50M/Xe-70M, R-series rotary)?
Remote start failure. Shutdown trip on digital input C3 related to the remote start circuit — the controller detected a fault in the remote start signal. (Some third-party sites misreport E:0030 as a temperature trip; the Ingersoll Rand Xe-50M/70M manual lists it as Remote Start Failure.)
Can I fix E:0030 on an Ingersoll Rand Xe-series controller (Xe-50M/Xe-70M, R-series rotary) myself?
Partly — if remote start isn't used, staff can check the switch isn't stuck and test a local start after a reset.
When does E:0030 on an Ingersoll Rand Xe-series controller (Xe-50M/Xe-70M, R-series rotary) need a technician?
Recurring trips need a technician to verify the remote start wiring and the controller's digital input configuration against the actual installation. If the trip recurs, have a technician verify the remote start wiring and the controller's digital input configuration.
Verified against service documentation: Ingersoll Rand Xe-series controller (Xe-50M/Xe-70M, R-series rotary) documentation for E:0030 (ifixcompressors.com)